1&1 AVM FRITZ!Box 7520 Quick Start Manual page 27

Step 2
Connect the DSL cable to the socket on
your 1&1 HomeServer labelled "DSL" or
"DSL / Tel".
Your 1&1 HomeServer will automatically configure itself for the DSL connection. The 1&1 HomeServer waits to receive
the DSL signal, which will be sent at some point during the day, before 6pm.
The configuration process takes at least 30 minutes once the DSL signal has been received. Do not unplug your device
from the mains on the connection date!
Please read Check it has switched over correctly to find out if the switch has been successful.
Once the switch has been made, you can unplug the LTE antenna from the 1&1 HomeServer.
After the conversion you may return the LTE antenna to 1&1. Please remove the SIM card first. You may also keep the
LTE antenna, if you want. In this case the costs will be invoiced to you.
FO N 1
27