DeWalt DCR019 Manual page 6

*Date code 201811475B or later
**Date code 201536 or later
English
Batteries
Cat # V
DC
DCB546 18/54
DCB547 18/54
DCB548 18/54
DCB181 18
DCB182 18
DCB183/B 18
DCB184/B 18
DCB185 18
DCB187 18
DCB189 18
DCB141 14.4
DCB142 14.4
DCB143 14.4
DCB144 14.4
DCB145 14.4
DCB122 12
DCB124 12
DCB125 12
DCB127 12
*Date code 201811475B or later
**Date code 201536 or later
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of your mains.
Your D WALT charger is double insulated in
e
accordance with EN60335; therefore no earth wire
is required.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1 mm
is 30 m.
When using a cable reel, always unwind the cable completely.
4
Weight
DCB104 DCB107
Ah kg
6.0/2.0 1.05 60 270
9.0/3.0 1.46 75* 420
12.0/4.0 1.44 120 540
1.5 0.35 22 70
4.0 0.61 60/40** 185
2.0 0.40 30 90
5.0 0.62 75/50** 240
1.3 0.35 22 60
3.0 0.54 45 140
4.0 0.54 60 185
1.5 0.30 22 70
4.0 0.54 60 185
2.0 0.30 30 90
5.0 0.52 75 240
1.3 0.30 22 60
2.0 0.20 30 90
3.0 0.25 45 140
1.3 0.20 22 60
2.0 0.20 30 90
WALT
e
2 ; the maximum length
Chargers/Charge Times (Minutes)
DCB112 DCB113 DCB115 DCB118
170 140 90
270 220 135*
350 300 180
45 35 22
120 100 60 60/40**
60 50 30
150 120 75 75/50**
40 30 22
90 70 45
120 100 60
45 35 22
120 100 60
60 50 30
150 120 75
40 30 22
60 50 30
90 70 45
40 30 22
60 50 30
Important Safety Instructions for All Battery
Chargers
SAVE THESE INSTRUCTIONS: This manual contains important
safety and operating instructions for compatible battery
chargers (refer to Technical Data).
• Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.

WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.

CAUTION: Burn hazard. To reduce the risk of injury,
charge only D WALT rechargeable batteries. Other types of
e
batteries may burst causing personal injury and damage.

CAUTION: Children should be supervised to ensure that
they do not play with the appliance.
NOTICE: Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature such
as, but not limited to, steel wool, aluminum foil or any
buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean
DCB132 DCB119
60 90 X
75* 135* X
120 180 X
22 22 45
60 120
30 30 60
75 150
22 22 X
45 45 90
60 60 120
X 22 45
X 60 120
X 30 60
X 75 150
X 22 40
X 30 60
45 45 90
X 22 40
X 30 60