Additional Functions Via The Pc Interface - Siemens Gigaset SL78H Manual

Gigaset SL78H / IM2 EN / A31008-M2058-R201-2-SM19 / appendix.fm / 19.03.2009
¤
To scroll through all the existing words,
repeatedly press the display key
.
Word§
¤
Press u or v or enter a special char-
acter (e.g. space, comma, full stop) to
confirm the required word.
If the entry is not saved in the dictionary or
the required word cannot be found when
scrolling through, the highlighting in the
text field will switch to an empty character
string. The note "Spell Word" will be dis-
played at the bottom left of the display.
¤
In this case, enter the word one charac-
ter at a time (
the entry as described.
The general rules for creating text apply
when entering digits and special charac-
ters and controlling the cursor
¢
( page 49).
Additional functions via the
PC interface
You can connect the handset to your com-
puter via Bluetooth (
the USB data cable supplied. If you want to
use the Bluetooth connection, your com-
puter must be equipped with a suitable
dongle. To be able to communicate via the
USB interface, you must install the driver
SMS 601(1)
Hello
_ _ _ _ _
Spell Word T9 Abc
< C Options
¢
page 50) and confirm
¢
page 38) or via

Additional functions via the PC interface

software from the supplied CD before con-
necting the USB data cable (
§Sel.
The program "Gigaset QuickSync" must
be installed on your computer for your
handset to communicate with your com-
puter (free download from
www.gigaset.com/gigasetsl780).
Please note
u
If the USB data cable is plugged in, a
Bluetooth connection cannot be
established.
u
If the enclosed USB data cable is
plugged in during an existing Blue-
tooth connection, the Bluetooth
connection is cancelled.
Transfer data
You can
u
synchronise your handset directory
with Outlook,
u
download CLIP pictures (.bmp) from
the computer to the handset,
u
download pictures (.bmp) as a screen-
saver from the computer to the handset
u
download sounds (ring tones) from the
computer to the handset.
During the transfer of data between hand-
set and PC, you will see
on the display. During this time
progress
the keypad is disabled, and incoming calls
will be ignored.
Completing a firmware update
¤
Connect your telephone and PC using
the USB data cable (
plied.
¤
Start the "Gigaset QuickSync" program
on the PC.
¤
Set up the connection to the handset.
¤
Open the [Device] tab via
[Settings]
¤
Click on [Firmware update]
The firmware update starts.
¢
page 14).
Data transfer in
¢
page 14) sup-
¢
[Device properties]
51