Table of Contents
Advertisement
Basic operations
Installing the AC adaptor/
charger
Use the supplied AC adaptor/charger.
(1)Set the mode change switch to VCR/
CAMERA.
(2)Connect the connecting cord to the DC OUT
jack on the AC adaptor/charger.
(3)Connect the mains lead to mains.
(4)While pressing the connecting plate of the
connecting cord, slide it to the left so that it
attaches to the battery mounting surface
firmly.
2
To remove the AC adaptor/charger
While pressing BATT, slide the connecting plate
to the right.
PRECAUTION
The set is not disconnected from the AC power
source as long as it is connected to the mains,
even if the set itself has been turned off.
Notes
•If you set the mode change switch to CHARGE
while operating the VCR, the power supply to
the VCR stops.
•You cannot change the battery pack attached to
the AC adaptor/charger while supplying the
power to the VCR.
Основные операции
Установка адаптера/зарядного
устройства переменного тока
переменного тока
(1)
(2)
(3)
(4)
4
3
1
Для снятия адаптера/зарядного
устройства переменного тока
ПРЕДОСТОРОЖНОСТЬ
Примечания
BATT
7
Advertisement
Table of Contents
