Step 3: Connecting The Vcr - Sony VIDEO Plus SLV-SE30UX Operating Instructions Manual

Step 3
Connecting the VCR
If your TV has a EURO-AV connector, see page 10.
If your TV does not have a EURO-AV (Scart)
connector
Mains lead
to mains
: Signal flow
1
Disconnect the aerial cable from your TV
and connect it to AERIAL IN on the rear
panel of the VCR.
2
Connect AERIAL OUT of the VCR and
the aerial input of your TV using the
supplied aerial cable.
3
Connect the mains lead to the mains.
If the mains plug does not fit in the mains, use the supplied plug
adaptor.
Note
• When you connect the VCR and your TV only with an aerial cable, you have to set
RF MODULATOR in the OPTIONS-2 menu to ON (initial setting) (see page 63).
AERIAL IN
AERIAL OUT
Aerial cable (supplied)
AERIAL IN
IN
ENTREE
AERIAL
OUT
ANTENNE
SORTIE
IN
ENTREE
AERIAL
OUT
ANTENNE
SORTIE
continued
Getting Started
9