Step 3 : Connecting The Vcr - Sony SLV-X9D Operating Instructions Manual

Step 3 : Connecting the VCR

If your TV has a PERITEL connector, see page 15.
• Connection to your TV with an aerial cable only, see this page.
• Connection to your TV and Set-Top Box, see page 17.
• Connection to your TV and decoder, see page 47.
If your TV does not have a PERITEL connector
Mains lead
to mains
: Signal flow
1
2
3
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 20).
14 Connecting the VCR
ANTENNE SORTIE
Disconnect the aerial cable from
your TV and connect it to
ANTENNE ENTREE on the rear
panel of the VCR.
Connect ANTENNE SORTIE of
the VCR and the aerial input of
your TV using the supplied aerial
cable.
Connect the mains lead to the mains.
ANTENNE ENTREE
ANTENNE
ENTREE
Aerial cable (supplied)
AERIAL
ANTENNE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
IN
ENTREE
OUT
SORTIE