Sony SLV-X9D/E Operating Instructions Manual page 21

4
Tune the TV to the same channel
shown in the VCR display window so
that the picture on the right appears
clearly on the TV screen.
Refer to your TV manual for TV
tuning instructions.
If the picture does not appear clearly,
see "To obtain a clear picture from the
VCR" below.
5
Press RF CHANNEL.
AUTO
SET UP
You have now tuned your TV to the VCR. Whenever you want to
play a tape, set the TV to the video channel.
RF CHANNEL
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 4 above, press PROGRAM +/–
so that another RF channel appears. Then tune the TV to the new RF
channel so that a clear picture appears.
If your TV has a Scart (EURO-AV) connector
1
Press ?/1 (on/standby) to turn on the VCR.
?/1 RF CHANNEL
PROGRAM +/–
SONY VIDEO CASSETTE RECORDER
continued
Tuning your TV to the VCR 21