Sony SLV-X815ME Operating Instructions Manual page 9

To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear blue screen
If the blue screen does not
appear clearly in step 4 above,
turn the RF CHANNEL screw at
the rear of the VCR with an RF
screwdriver to a position where
the TV clearly displays the blue
RF CHANNEL
screen.
Selecting the TV system
For your TV to receive the correct
signal from your VCR, you must
set the TV SYSTEM switch at the
rear of the VCR to either G (for
system B/G) or K (for system D/
K). If this switch is set to the
wrong position, the sound will be
TV SYSTEM
K G
distorted.
9
Getting Started