System - Sony SLV-SE610G Operating Instructions Manual

Example C
How to connect to a stereo system (SLV-SE810G only)
Connect the
on the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.*
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-
2106HG cable instead and connect the cable to the line out jacks of the other VCR.
* 1 SLV-SE810G only
2
* SLV-SE710G and 710I only
80
Connecting to a VCR or stereo system
Your VCR (Recorder)
: Signal flow
t
LINE-2 L
t LINE-3 IN*
1
or
t LINE-2 IN*
2
VMC-2121HG Scart cable (not supplied)
o
R jacks on this VCR to the audio output jacks
TV
Other VCR (Player)
Scart
(EURO-AV)
1