The Dial Timer; Slv-Se810D/E And Sx810D Only - Sony SLV-SE610A Operating Instructions Manual

To set the clock
1
Turn DIAL TIMER so that "CLOCK" appears in the display window.
2
Press DIAL TIMER.
"DAY" appears in the display window.
3
Turn DIAL TIMER to set the day.
4
Press DIAL TIMER.
"MONTH" appears in the display window.
5
Turn and press
After you set the year, "CLOCK" appears in the display window again.
6
Turn and press
7
When you have finished setting the time, press
the clock.
Tips
• To cancel a Dial Timer setting, press x (stop) on the VCR while you are making
the setting.
• The programme is recorded in the current tape speed mode. To change the tape
speed, press SP/LP before you complete the setting in step 9.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed
to the LP mode. Note that some interference will appear on the picture at the point
the tape speed is changed. If you want to keep the same tape speed, set AUTO
LONG PLAY to OFF in the OPTIONS-1 menu (page 82).
• To check, change, or cancel the programme setting, see "Checking/changing/
cancelling timer settings" (page 66).
Notes
• If eight programmes have already been set using the ShowView system or the
TIMER menu, "FULL" appears in the display window for about five seconds.
• The indicator flashes in the display window when you complete the setting in
step 9 with no tape inserted.
• If you set the clock using the Auto Clock Set function and AUTO ADJUST is set to
ON, the clock will adjust itself to the incoming time signal regardless of
adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set
correctly.
• The station name may not appear if the VCR does not receive station name
information signals.
Recording TV programmes using the Dial Timer (SLV-SE810D/E and SX810D only)
DIAL TIMER to set the month, and then the year.
DIAL TIMER to set the hour and minute.
DIAL TIMER to start
continued
51