Sony SLV-SE610A Operating Instructions Manual page 46

time counter and the remaining time appear alternately. The
indicates the remaining time.
In order to get an accurate remaining time indication, be sure TAPE
LENGTH in the OPTIONS-1 menu is set according to the tape type you use
(see page 82).
To watch another TV programme while recording
1 Press t TV/VIDEO to turn off the VIDEO indicator in the display
window.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the
programme number buttons on the remote
commander. For two-digit numbers, press the
- (ten's digit) button followed by the programme number buttons.
• If you connect additional equipment to a LINE connector or jack, you can select
the input signal using the INPUT SELECT or PROG +/– buttons.
• The
about the tape, but the information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When
using a decoder, make sure to leave it on.
Notes
• The
motion playback.
• The
tape.
46
Recording TV programmes
SP 0 : 0 0 : 2 2
Time counter
DISPLAY information appears on the TV screen indicating information
DISPLAY information does not appear during still (pause) mode or slow-
DISPLAY information will not appear while playing an NTSC-recorded
indicator
1 : 4
Remaining time
Safety tab
6