Step 4 : Tuning Your Tv To The Vcr - Sony SLV-SE610A Operating Instructions Manual

Step 4 : Tuning your TV to the VCR

If your TV has a Scart (EURO-AV) connector, see page 20.
If your TV does not have a Scart (EURO-AV) connector
Follow the steps below so that your TV will properly receive the video
signals from your VCR.
1
Press ?/1 (on/standby) to turn on the VCR.
2
Press RF CHANNEL on the VCR lightly.
AUTO
SET UP
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
RF CHANNEL
3
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
RF CHANNEL
?/1
PROGRAM +/–
continued
Tuning your TV to the VCR
19