Universal Power Group AP Series Quick Start Manual page 2

3
4
5
6
Remove the black top of the electrolyte pack.
7
With scissors, snip off the end of the plastic
electrolyte pack at a 45-degree angle and
connect a long section of the tube to it.
Tilting the electrolyte pack away from your
8
body, fill each of the six cells. Be carefull not
to spill any electrolyte on you; fill the cells
to the "UPPER LEVEL" as indicated on the
front of the battery. Let the battery stand
for 30 minutes in an upright position. The
electrolyte level may settle during standing.
If it does, then add electrolyte again to the
"UPPER LEVEL" line. DO NOT OVER FILL.
There may be some electrolyte left over.
POWERSPORTS BATTERIES
TM
AP SERIES
2