Table of Contents
Advertisement
Troubleshooting
The following advice should help you to solve problems. If this does not help, you
will find useful information in the detailed FAQs on our website. Otherwise, please
contact our hotline (see page 3). Take note of the warranty instructions.
Problem
Possible cause
The
The AmpStation is off
AmpStation
or doesn't have any
doesn't
power.
emit sound.
The preamplifier is set
to "mute".
The volume is set to "0"
on the preamplifier.
The
The AmpStation is
AmpStation
connected to a different
hums.
power circuit from the
rest of the system.
The humming is caused
by problems with the
power supply.
The humming is caused
by a multiple socket
strip.
The
The switch
AmpStation
AUTO POWER (7) is not
does not
set to "AUTO" or "LINK".
automati-
The Teufel Link connec-
cally turn
tor cable has not been
off.
inserted.
Solution
Activate the AmpStation with the switch
(2). Check the mains cord and socket.
Deactivate the mute mode on the pream-
plifier (mostly with the
Increase the volume.
Connect the AmpStation and preamplifier
to the same power circuit.
Buy a mains filter and connect both devic-
es to it.
Use a different multiple socket strip or
connect the AmpStation directly to the wall
socket. It may also help to insert the mains
plug in the socket the other way around.
Set the switch AUTO POWER (7) to "AUTO"
or "LINK".
Verify the correct connection of the
AmpStation and the preamplifier.
button).
• AmpStation
15
Advertisement
Table of Contents
