Table of Contents
Advertisement
7
Press
DIAL TIMER
The programme position or station name appears in the display
P
T
window.
8
Turn
DIAL TIMER
To record from another source connected to the LINE input, turn
P
T
DIAL TIMER or press INPUT SELECT to display the connected
line in the display window.
INPUT
SELECT
9
Press
DIAL TIMER
"OK" appears in the display window for about five seconds.
P
T
The
by for recording.
To record from another source, leave the connected equipment
switched on.
To return to the previous step
To return to the previous step, press the PROGRAM + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x STOP.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 36).
• Display tape information on the TV screen (page 39).
• Check the timer settings (page 57).
• Watch another TV programme (page 39).
DIAL TIMER.
DIAL TIMER to set the programme position.
DIAL TIMER to complete the setting.
indicator appears in the display window and the VCR stands
Recording TV programmes using the Dial Timer
SP
VIDEO
OPC
SP
VIDEO
OPC
indicator
continued
43
Advertisement
Table of Contents
