Sony SLV-SE310G/I Operating Instructions Manual page 35

4
If the displayed personal code is correct, press OK.
If the displayed personal code is wrong, press CLEAR and continue
PLAY
from step 2.
OK
CLEAR
To confirm your personal code
While the VCR is turned off and there is no tape in the VCR, hold down X
(pause) and ?/1 (on/standby) on the VCR simultaneously for more than
three seconds. The entered personal code appears on the TV screen. Press
any button to enter normal viewing mode.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
Setting your personal code
35