Sony SLV-SE240G/I Operating Instructions Manual page 69

Example C
TV
Other VCR (Player)
Scart
(EURO-AV)
: Signal flow
How to connect to a stereo system (SLV-SE840G only)
Connect the
on the stereo system, using an audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use an adequate
cable instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the LINE-3*
INPUT SELECT to display "L3"*
* 1 SLV-SE840G
2
* SLV-SE740G/I and SE240G/I
Scart cable (not supplied)
LINE-2 L R jacks on this VCR to the audio output jacks
t o
Your VCR (Recorder)
LINE-3*
1 or LINE-2*
1 2
or "L2"* in the display window.
Connecting to a VCR or stereo system
1 or LINE-2* 2
2 connector, press
69