Sony SLV-SE240G/I Operating Instructions Manual page 21

Notes
• Whenever you operate the Auto Set Up function, some of the settings
(VIDEO Plus+, timer, etc.) will be reset. If this happens, you have to set them
again.
• Auto preset starts automatically only when you plug in the mains lead for the first
time after you purchase the VCR.
• If you want to use the Auto Set Up function again, press MENU, then press M/m/
</, to highlight INSTALLATION and press OK. Press M/m to highlight
AUTO SET UP, then repeat the procedure in step 3.
• Auto preset can be performed by pressing x (stop) on the VCR continuously for 5
seconds or more with no tape inserted.
* not available on SLV-SE240G
Setting up the VCR with the Auto Set Up function
21