Siren Specifications; Lighting Specifications - Code 3 XCEL Series Manual

Siren Specifications

Siren Section:
Input Voltage
Operating Current 100W: 8 Amps @ 13.6V with 11-ohm load (100 Watt Speaker) - 12V units
(NOTE: There is no 58 Watt speaker connection available.)
Standby Current
Cycle Rate
Voltage Output

Lighting Specifications

Warning Light Control:
Level 1 & 2:
Level 3A & 3B:
AUX A thru F:
System - Weight:
Size:
Temperature:
10 to 16 VDC and ground - 12V units
(Note: Operation of 12V units above 15 VDC for an extended period of time may result in speaker damage.)
200W: 14 Amps @ 13.6V with 5.5-ohm load (2-100 Watt Speakers) - 12V units
Ignition On < 200mA
Ignition Off < 3mA
Wail - 11 cycles/minute
Yelp - 200 cycles/minute
~ 66 Vpp
3-Level Switch, 4 Outputs, 50 Amps maximum combined total
15 Amp Maximum Each Level
Green (1) & Yellow (2) LED Indication
15 Amp Maximum Each Level
Red (3) LED Indication
10 Amp Maximum Each Aux
60 Amp Maximum Total
Siren
Boxed Unit
Amplifier
-22F thru +149F (-30C thru +65C) SAE Equipment Type EVS1
4.5 lbs (1.9 Kg)
6.0 lbs (4.3 Kg)
5.585"L x 6.520"W x 2.765"H
11