Sony SLV-SE100A1, SLV-SE100A2 Operating Instructions Manual page 55

4
If you want to change the date, tape
speed*
PLAY
1 Press </, to highlight the item you
OK
2 Press M/m to reset it.
• To record the same programme every
• To use the VPS/PDC function*
5
Press MENU to exit the menu.
MENU
6
Press ?/1 to turn off the VCR.
The
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 4 above, press m to select the recording pattern. Each time you press m, the
indication changes as shown below. Press M to change the indication in reverse
order.
TODAY t SUN-SAT (Sunday to Saturday) t MON-SAT (Monday to Saturday) t
MON-FRI (Monday to Friday) t SAT (every Saturday) ..... t MON (every Monday)
t SUN (every Sunday) t 1 month later t (dates count down) t TOMORROW
t TODAY
Timer recording with VPS/PDC signals
(not available on SLV-SE250P and SE450P)
Some broadcast systems transmit VPS (Video Programme System) or PDC
(Programme Delivery Control) signals with their TV programmes. These signals
ensure that your timer recordings are made regardless of broadcast delays, early
starts, or broadcast interruptions (when the VPS or PDC indicator in the display
window is lit).
To use the VPS/PDC function, set VPS/PDC to ON in step 4 above. You can also use
the VPS/PDC function for a source connected to one or more of the LINE inputs.
Recording TV programmes using the ShowView system (not available on SLV-SE100A1/A2)
1
, and the VPS/PDC setting*
want to change.
day or the same day every week, see
"Daily/weekly recording" on page 55.
indicator appears in the display window and the VCR stands by for
2 TIMER
:
DATE
TODAY
SP / LP SP
LIST
SELECT :
SET :
CANCEL : CLEAR
2
, set VPS/PDC to ON.
continued
2 8 . 9 THU
TIME PROG.
1 9 : 0 0 2 0 : 0 0 3 5
VPS / PDC ON
EXIT : MENU
55