Title: CWPC_GLU_0140 Accu-Chek Inform II Training Guide
Can simulate with a Level 5 or 6 Proficiency sample during training.
Meter is ready for Patient sample.
Follow reference guides for the capillary puncture.
Select puncture site
Choose appropriate capillary puncture device
Puncture site is clean. Clean site with soap & water if required.
Disinfect with 2% chlorhexidine in 70% isopropyl alcohol
Perform skin puncture.
Remove first drop of blood. (removes any contaminants or residual
disinfectant solution which could dilute the glucose value).
Apply 2
Result appears after 5 seconds
Numerical Glucose value will display if within 0.6-33.3 mmol/L
@ PHSA there are two different configurations programmed:
Configuration 1
Children's Hospital
Women's Hospital
Neonate ranges
Sunny Hill
Displayed
Canuck Place
Configuration 2
BC Cancer Agency – all wards & clinics
Adult ranges
Displayed
Medical Approval: Dr Benjamin Jung
Version: 1.2
Folder Name: CW\Point of Care\Whole Blood Glucose
This is a controlled document for CW use only. Any printed copies are uncontrolled unless specified. Please refer to Lab QMS
PHSA Laboratories CW Site - Point of Care
nd
drop to the FRONT EDGE of the test strip.
Page 9 of 12
Medical Approval Date: 27 Dec 2016
Implementation Date: 7/2/2019 11:55:59 PM
Need help?
Do you have a question about the Inform II and is the answer not in the manual?