Step 4: Tuning Your Tv To The Vcr - Sony SLV-ED70MN Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
1
ON/STANDBY
2
RF CHANNEL
3
4
RF CHANNEL
– PROGRAM +
8
Getting Started
3/04-18_SLV-ED70MN.12E
1/u ON/STANDBY
RF CHANNEL
Press 1/u ON/STANDBY to turn on the VCR.
Press RF CHANNEL on the VCR.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
Turn on your TV and select a programme position for the VCR picture.
This channel will now be referred to as the video channel.
Some TV has the programme position, such as 0, that is reserved for
a VCR. In this case, select that programme position for the VCR
picture. Refer to the instruction manual of your TV for details.
Press RF CHANNEL.
The TV system indicator appears in the display window.
Press PROGRAM +/– to select the correct TV system.
If your TV system is
B/G
I
D/K
8
PROGRAM +/–
SP
Select
G
I
K
Selected TV system
SP
1/17/01, 2:29 PM
APC
APC