Editing With Another Vcr - Sony SLV-ED616MJ Operating Instructions Manual

Editing with another VCR

How to connect to record on this VCR
e.g. SLV-ED818SG
This VCR (Recorder)
VMC-810HG audio/video cable (not supplied)
: Signal flow
How to connect to a stereo system (SLV-ED818SG
only)
Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the
stereo system, using the RK-C510HG audio cable (not supplied).
Tips
• (SLV-ED616MJ/SG)
Use the following audio/video cable according to the type of the other VCR.
Jack
LINE-1 IN
(2 pin)
LINE-2 IN
(3 pin)
• (SLV-ED818SG)
You can use the LINE-2 IN jacks instead. If the other VCR is a monaural type, the
sound is recorded only on the channel whose jack is connected to the audio plug. To
record on both right and left channels, connect the audio plugs to the AUDIO R/L
jacks using a VMC-910HG audio/video cable (not supplied).
Notes
• Make sure you connect the plugs to the jacks of the same colour.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
01GB02CNT-ED818.p65
LINE-1 IN
If the other VCR is: Use a cable such as:
Stereo type VMC-910HG (3-phono to 2-phono)
Monaural type VMC-710HG/720HG (2-phono to 2-phono)
Stereo type VMC-810HG (3-phono to 3-phono)
Monaural type VMC-910HG (3-phono to 2-phono)
19
TV
Other VCR (Player)
LINE OUT
12/3/01, 11:10 AM
continued
19