Displaying And Maintaining Nat - H3C S9500 Series Operation Manual

Operation Manual – L3+NAT
H3C S9500 Series Routing Switches
Caution:
A NAT module limits user connections based on the policy bound to it. Each NAT
module can be bound with one policy only.
The global connection-limit configuration does not take effect until you bind the
connection-limit policy with the NAT module.
If multiple NAT modules exist in the system, the connection limit policy applies to all
these NAT modules.
A connection limit policy does not take effect in NO-PAT translation.

1.9 Displaying and Maintaining NAT

Display information about
the NAT address pool
Display configurations
about all forms of NAT
Display the
connection-limit
information
Display the address
translation configuration
Display the internal server
information
Display the information
about active connections
Display NAT statistics
Display information about
the connection-limit policy
Display NAT log
information
To do...
display nat
address-group
display nat all
display nat
connection-limit { all | ip
user-ip [ vpn-instance
vpn-instance-name ] }
display nat outbound
display nat server
display nat session slot
slot-number protocol
{ tcp | udp }
[ vpn-instance
vpn-instance-name ]
source { global
global-address global-port
| inside inside-address
inside-port } destination
dst-address
destination-port
display nat statistics
slot slot-number
display connection-limit
policy { policy-number |
all }
display nat log
Use the command...
1-18
Chapter 1 NAT Configuration
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view