Step 4: Tuning Your Tv To The Vcr - Sony SLV-ED10ME Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
1
Press 1/u ON/STANDBY to turn on the VCR.
ON/STANDBY
2
Press RF CHANNEL on the VCR.
The factory-preset RF channel appears in the display window.
RF CHANNEL
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR picture.
This channel will now be referred to as the video channel.
Some TV has the programme position, such as 0, that is reserved for
a VCR. In this case, select that programme position for the VCR
picture. Refer to the instruction manual of your TV for details.
4
Press RF CHANNEL.
The TV system indicator appears in the display window.
RF CHANNEL
Press PROGRAM +/– to select the correct TV system.
– PROGRAM +
If your TV system is
B/G
I
D/K
1/u ON/STANDBY
PROGRAM +/– RF CHANNEL
SP
Select
G
I
K
Selected TV system
SP
Getting Started
APC
APC
continued
7