Table of Contents
Advertisement
Playing back a CD
1
2
3
4
5
6
7
8
9
0
> 10
Audio/Video Equipment Operations
52
1 Press CD and turn on the CD player.
The unit turns on and switches the input source to the CD player
connected to the CD jacks.
2 Press 6 OPEN/CLOSE to open the disc tray.
If the disc tray or cover doesn't open, refer to your CD player's
6 OPEN/CLOSE
operating instructions.
3 Load a CD or CDs referring to your CD player 's operating
CD
instructions.
4 Press 6 OPEN/CLOSE to close the disc tray.
If the disc tray or cover doesn't close, refer to your CD player's
operating instructions.
Number
buttons/>10
Depending on the CD player, you can skip this step. Refer to your
CD player's operating instructions.
5 Press · PLAY.
SKIP/D.SKIP
Depending on the CD player, you can skip this step. Refer to your
= / +
A M S
CD player's operating instructions.
P PAUSE
Additional tasks
) F F / 0
R E W
To
· P L AY
Stop play
p STOP
Pause play
Resume play after pause
Scan forward or backward
Locate the beginning of other
tracks
(Stop and) remove the CD
This function doesn't operate
some CD players.
Close the tray
This function doesn't operate
some CD players.
Select other discs
This function only works for
CD players with a built-in
multi-disc changer.
To locate a track with the number buttons
Press one of the number buttons for single digit track numbers (except
0).
To locate the 10th track, press 1, then 0.
To enter a track number over 10, first press >10, then any number
button for the tens digit except 0, and the number button for the ones
digit.
Examples of entering the two-digit number
To
Enter 30
Enter 24
Press
p STOP
P PAUSE
P PAUSE or · PLAY
And hold ) FF or 0 REW during
playback
= / + A M S r e p e a t e d l y
6 OPEN/CLOSE
6 OPEN/CLOSE
SKIP/D.SKIP repeatedly during playback or
before playback
Press
>10, then 3, and 0
>10, then 2, and 4
Advertisement
Table of Contents
