Do you have a question about the Garden Series and is the answer not in the manual?
Questions and answers
Paul
June 21, 2025
How to wire just two garden speakers. Do you go from amp to speaker to base on each side or amp to bad to speaker?
1 comments:
Mr. Anderson
August 21, 2025
To wire two Sonance Garden Series speakers to an amplifier:
1. Use 14-gauge, 2-conductor burial-rated speaker cable. 2. From the amplifier, run the cable to the first speaker location. 3. Strip the wire ends to expose the copper. 4. Connect the red (+) wire from the amplifier, the red wire of the first speaker, and the red wire going to the second speaker together. Twist and secure them with a silicone-filled wire nut. 5. Repeat for the black (-) wires. 6. Wrap the wire nut and surrounding connection with outdoor-rated electrical tape for moisture protection. 7. At the second speaker, cut the wire and strip the ends. 8. Connect the red (+) wire from the cable to the red wire of the speaker, and the black (-) wire to the black wire of the speaker. Secure each with a wire nut and tape.
Ensure no copper is exposed and all connections are weatherproofed.
Need help?
Do you have a question about the Garden Series and is the answer not in the manual?
Questions and answers
How to wire just two garden speakers. Do you go from amp to speaker to base on each side or amp to bad to speaker?
To wire two Sonance Garden Series speakers to an amplifier:
1. Use 14-gauge, 2-conductor burial-rated speaker cable.
2. From the amplifier, run the cable to the first speaker location.
3. Strip the wire ends to expose the copper.
4. Connect the red (+) wire from the amplifier, the red wire of the first speaker, and the red wire going to the second speaker together. Twist and secure them with a silicone-filled wire nut.
5. Repeat for the black (-) wires.
6. Wrap the wire nut and surrounding connection with outdoor-rated electrical tape for moisture protection.
7. At the second speaker, cut the wire and strip the ends.
8. Connect the red (+) wire from the cable to the red wire of the speaker, and the black (-) wire to the black wire of the speaker. Secure each with a wire nut and tape.
Ensure no copper is exposed and all connections are weatherproofed.
This answer is automatically generated
What kind of wire I need to install the speakers