Making A Custom Title; Creación De Títulos Personalizados - Sony GV-D300 Operating Instructions (primary manual) Operating Instructions Manual

Digital video cassette recorder
Hide thumbs Also See for GV-D300 Operating Instructions (primary manual):
Table of Contents

Advertisement

Making a custom
title
If you use a tape with cassette memory, you can
make one title of up to 20 characters and store it
in memory.
(1)Press TITLE to display the titles.
(2)Turn the control dial to select CUSTOM
TITLE, then press the control dial.
(3)Turn the control dial to select the column of
the desired character, then press the control
dial.
(4)Turn the control dial to select the desired
character, then press the control dial.
(5)Repeat steps 3 and 4 until you finish the title.
(6)Turn the control dial to select [
the control dial.
To erase a character
In step 3, turn the control dial to select [ M ] then
press control dial. The last character is erased.
To change the title you have made
In step 2, turn the control dial to select the title
which you want to change, then press the control
dial. Erase characters one after another, then
make the new title again.
42
Creación de títulos
personalizados
Si utiliza una cinta con memoria en cassette,
podrá crear un título compuesto por un máximo
de 20 caracteres y almacenarlo en memoria.
(1)Presione TITLE para que aparezcan los títulos.
(2)Gire el dial de control para seleccionar
CUSTOM TITLE y, a continuación, presione
dicho dial.
(3)Gire el dial de control para seleccionar la
columna del carácter que desee y, a
continuación, presione dicho dial.
(4)Gire el dial de control para seleccionar el
carácter que desee y, a continuación, presione
], then press
dicho dial.
(5)Repita los pasos 3 y 4 hasta completar el
título.
(6)Gire el dial de control para seleccionar [
a continuación, presione dicho dial.
Para borrar un carácter
En el paso 3, gire el dial de control para
seleccionar [ M ] y, a continuación, presione dicho
dial. El último carácter se borrará.
Para cambiar el título creado
En el paso 2, gire el dial de control para
seleccionar el título que desee cambiar y, a
continuación, presione dicho dial. Borre los
caracteres uno por uno y, después, vuelva a crear
un título.
] y,

Advertisement

Table of Contents
loading

Table of Contents