Recording; Settings For Recording - Sony 85P Operating Instructions Manual

Recording

Settings for Recording

..........................................................................................................................................................................................................
1) For dubbing of DVCAM format signals through the
QSDI interface, use the auto mode (AUTO FUNCTION)
execution menu item QSDI DUBBING.
This section describes the necessary settings and operations to perform
recording on this unit. The same settings and operations apply whether
you are using the unit as part of an editing system, for dubbing
stand-alone recorder. For the necessary connections for recording and the
settings not covered in this section, see Chapter 5 "Connections and
Settings".
1
Video monitor
REMOTE/LOCAL
Audio level meter
switch
3
7 6 5 4
Note
When controlling this unit from an editing controller, set the REMOTE/
LOCAL switch to "REMOTE". When not, set the switch to "LOCAL".
1
Power on the video monitor, then set the monitor's input switches
according to the input signals from this unit.
2
Set up the player to play back a tape.
For details, refer to your player's operating instructions.
3
Power on this unit by pressing on the "1" side of the POWER switch.
For details, see the section "Dubbing Signals in QSDI
Format QSDI Dubbing Function" on page 38.
6 0
Player (DSR-60/60P, etc.)
AUDIO MODE display
INPUT MODE display
6 0 ) p
Recorder (DSR-85/85P)
Chapter 2 Recording and Playback
1) , or as a
2
) p
r
(Continued)
19