Sony 85P Operating Instructions Manual page 18

Location and Function of Parts
4 Analog audio signal input/output section
ANALOG
REF.VIDEO VIDEO IN
IN
75
ON
OFF
OUT IN
TIME CODE
IN
OUT
MONITOR
AUDIO
IN
1 AUDIO IN 600
ON/OFF switches
Use these switches to select either 600
(the ON setting) or 10-k impedance (the OFF setting)
for the AUDIO IN CH-1 to CH-4 connectors.
2 AUDIO IN –6 dBm/0 dBm/+4 dBm switches
Set these switches according to the levels of the signals
input to the AUDIO IN CH-1 to CH-4 connectors.
3 AUDIO IN CH-1 (channel 1) to CH-4 connectors
(XLR 3-pin, female)
Use these connectors to connect separate channels of
audio input from a player VCR or other external audio
equipment.
18
Chapter 1 Overview
I/O
VIDEO OUT
1
75
ON
2
(SUPER)
OFF
COMPONENT VIDEO
OUT
Y
AUDIO IN 600
OFF ON OFF
0dBm
-8dBm +4dBm -8dBm
R-Y
CH-1 CH-2
B-Y
AUDIO OUT
S VIDEO
CH-1 CH-2
OUT
impedance
600 600 600
ON OFF ON OFF ON
0dBm 0dBm 0dBm
+4dBm -8dBm +4dBm -8dBm +4dBm
CH-3 CH-4
CH-3 CH-4
4 AUDIO OUT CH-1 (channel 1) to CH-4
connectors (XLR 3-pin, male)
Output channel-1 to channel-4 audio signals,
respectively.
5 MONITOR AUDIO connector (RCA phono
jack)
Outputs audio signals for monitoring. The audio
signals to be output from this connector can be
selected with the MONITOR SELECT switches on the
front panel. (See 4 menu control panel on page 13.)
1 AUDIO IN 600
ON/OFF switches
2 AUDIO IN –6 dBm/0 dBm/+4 dBm
switches
3 AUDIO IN CH-1 to CH-4 connectors
4 AUDIO OUT CH-1 to CH-4 connectors
5 MONITOR AUDIO connector