Sony SCPH-10420 U Instruction Manual page 15

Program Play settings are saved and remain in effect even after playback
ends. Press the PROGRAM button to display the Program Setup screen, and
then press the START button to play the programmed sequence again.
To check playback settings
During playback, press the TIME button. Icons for currently set playback
modes are displayed in the top right corner of the screen.
Changing or clearing Program Play settings
1
Press the PROGRAM button.
2
Use the directional buttons to select the item number you
want to change, and press the ✕ button.
3
Use the directional buttons to select the title number you
want to play, and press the ✕ button.
4
Use the directional buttons to select the chapter number you
want to play, and press the ✕ button.
To clear an item, select "Clear" at step 3, and press the ✕ button.
To clear all Program Play settings
1
Press the PROGRAM button.
2
Use the directional buttons to select "Clear all", and press
the ✕ button.
To use Program Play with Shuffle Play or Repeat Play
• Program Play with Shuffle Play
During playback in Program Play mode, press the SHUFFLE button.
Shuffle Play is turned on. When Shuffle Play is used with Program Play,
Shuffle Play options are limited to "Shuffle On" and "Shuffle Off".
• Program Play with Repeat Play
During playback in Program Play mode, press the REPEAT button.
Repeat Play is turned on. When Repeat Play is used with Program Play,
Repeat Play options are limited to "Repeat On" and "Repeat Off".
US
15