Table of Contents Introduction Use & Care 2.1 On/Off 2.2 Quick Disconnect 2.3 Grips 2.4 Emergency Release Switch 2.5. Maintenance, Care and Cleaning 2.6. Battery Service & Warranty 3.1. Service 3.2. Warranty Safety/Cautions Disposal Technical information Quality Assurance User Information...
Read this document thoroughly before using your MyHand. and secure. MyHand is a size 7 ¾ and needs a socket with a female quick disconnect, a 5A battery and two myo-sensors to work. MyHand Your socket must include a 5A battery for CAUTION! is connected to the socket with the quick disconnect.
2.3 Grips 2.4 Emergency Release Switch MyHand has several adaptive and sensitive grips. The fingers will An emergency release switch is situated on the back of the hand, fold around any given form or object. To make a fist, tripod grip or just below the On/Off button.
Hands returned to your prosthesis provider will be sent to Hy5Pro The MyHand is like any other electrical device, do not immerse in AS. The hand will be assessed and where deemed beyond repair water. When cleaning MyHand, use a damp cloth. For instructions replaced if the warranty is applicable.
5. DISPOSAL you to adjust the sensitivity of the myo-sensors in your sleeve. When disposing of MyHand, please send it back to Hy5pro AS for safe disassembly and disposal. What if the device gets You should dry it as soon as you...
+5°C to +35°C / +41F to +95F 8. QUALITY ASSURANCE Hy5 is registered with the Directory of health in Norway. Hy5 is marked with a CE mark indicating that it complies with the requirements of the Medical Devices Directive 93/42/EC. 12 / 16...
Page 8
FDA Registration Number: 3014936213 CE mark Declaration of conformity according to the applicable European directives Legal manufacturer Hy5Pro AS, Raufoss Industripark, Bygning 100, 2830 Raufoss, NORWAY 35°C/ Storage Temperature Limit: 5°C/41F to +35°C/95F 5°C /...
Need help?
Do you have a question about the MyHand and is the answer not in the manual?
Questions and answers