Related Manuals for Hy5 MyHand
Summary of Contents for Hy5 MyHand
- Page 1 Service manual MyHand Revision: 02 Date: June 2019 user id: product nr: date of manufacture:...
- Page 2 Table of Content Introduction 1.1 Dimensions and specifications 1.2 MyHand Check list Prosthesis and third party components 2.1 Electrodes/Myo sensors 2.2 Batteries 2.3 Replacement of fingers 2.4 Replacement of fingers pads MySkin prosthetic glove 3.1 Fitting Connections and Compatibility Disposal...
-
Page 3: Dimensions And Specifications
1. INTRODUCTION 1.1 DIMENSIONS AND SPECIFICATIONS Principal dimensions This document provides instructions for fitting and service of MyHand, and should be Maximum opening - thumb opposed to index finger 118 mm read in full prior to fitting or Thumb swing through angle (opposed to non-opposed) 70°... - Page 4 • from fully open to point of first contact Hy5 is connected to the socket with the quick disconnect. A Hy5 3. Check hand switches to high power mode prosthesis glove size 7 ¾ shall be used on the hand at all time.
-
Page 5: Troubleshooting
3. THE PROSTHETIC GLOVE contact with the skin Check the electrode cable is correctly • MyHand shall always be used with a MySkin glove. Use only size 7 fitted to the electrode ¾, and ensure that the glove is fitted properly. MyHand stops Electrode settings may need 3.1 Fitting... -
Page 6: Safety And Cautions
• automobiles, aircraft, sailing vessels of any kind and any other motorized vehicle or device Do not use MyHand for extreme activities that may cause injury • to a natural hand Do not expose to excessive moisture, liquid, dust, vibration or •... - Page 7 hy5.no...
Need help?
Do you have a question about the MyHand and is the answer not in the manual?
Questions and answers