Hy5 MyHand Manual

WELCOME to the Hy5 family! With
a strong, stable grip and robust
construction, your MyHand can be
used for many demanding activities. Use this
guide to get going quickly then check out our
website for inspiration and examples of the
MyHand in action!
1. CHECK
Check that everything is present in your
MyHand box:
1x MyHand
1x MyHand User Manual
1x MyHand Service Manual
1x Product Integration Guide
1x MyWrist User Manual
1x MyWrist Protection Cap & Force
Adjustment Tool
1x MyWrist hex key tool
1x MyWrist Unlocking Tool
5x MyWrist spare ball bearings
Allow your MyHand to warm/cool to
recommended operating
temperature window (+5 to +35°C)
2. PREPARE
Verify all 3 party components
rd
with Product Integration Guide
Download Hy5 app (for iPhone
& iPad)
Book Hy5 technical support so
we are on standby during the
fitting
3. CONNECT / RELEASE
First: Clean the coaxial plug with a dry cloth (the
plug should be cleaned at least once per week)
Coaxial plug
Connect: Align hand with the socket and push
in firmly towards the wrist. Rotate 90 degrees in
either direction - your MyHand will turn on
automatically and is ready to use!
Disconnect: Holding your MyHand securely,
rotate by 360 degrees – when increased
resistance is felt, continue to rotate and your
MyHand can be gently released from the socket.
Your Myhand should be disconnected from the
socket when not in use to maximise battery life.
4. LOGIN & CONNECT
Log in to your App and follow instructions to
connect to your MyHand (your MyHand must be
physically present to connect)
5. SETTINGS
Use the toggle switches to define your preferred
settings
6. TUNING
Tune your EMG sensors and the in-App
sensitivity settings to match your needs.
EMG setting #4 and MyHand sensitivity 81% are
recommended default starting points