Interface Description - Toa IP-1000AF User Manual

Front
①INPUT SIGNAL: input indicator light
②STATUS: status indicator light
③POWER: power indicator light
④Grounding switch
⑤INPUT VOLUME: input volume adjusting knob, the input volume adjusting, clockwise direction is increase
the volume, counterclockwise is decrease the volume.
⑥RESET: pressing the button to restore the factory default IP (or upgrade firmware )、broadcasting IP.
Status
Forced to restore the IP address
Forced into the firmware upgrade
page
Broadcasting IP
⑦LAN: network interface
⑧Power interface: DC24V/1A
⑨Control input/output interface
IN: control input interface, E is control input reference place, H is control input interface, when the two pins
is short circuit, IP audio interface unit will execute the operation automatically, which is setting by browser.
OUT: control output interface, "NC" is control output normally closed contacts,
"NO" is control output normally open contacts, "C" is control output public contacts.
⑩Audio input/output interface
IN: audio input interface, E is audio input reference place, H is audio signal input ,1Vrms/10KΩ，unbalance.
OUT: audio output interface, E is audio output reference place, H is audio signal output,1Vrms/600Ω，
unbalance
.
Chapter 2: Products Description
Back
Electricity status, pressing the button in 3s
Pressing the button before electricity, and keep it in 5s then
loosen it
Electricity status without network, quickly pressing and
then release it

2.2 Interface Description

Operation
2-2