Toa IP-1000AF User Manual page 17

4.4 Fire alarm parameters
Status
Alarm input linkage
alarm output
Alarm output linkage
recovery time
Chapter 4: System setting by browser
When control input in the status which isn't trigger the control input
interface,, the status decide the alarm way.(open circuit alarm or closed
circuit alarm)
NO: control input interface is closed to trigger the alarm.
OFF: control input interface is disconnected to trigger the alarm.
When the alarm input is triggered, configure whether linkage alarm output
or not.
The time of alarm output triggering
Note: the effective time range is 1-29 S, when setting as 0,that means the
alarm output continue linkage.
4.4 Firm alarm parameters
4-4