Using Lenovo Pen Pro - Lenovo ThinkPad P1 Extreme User Manual

If you show programs using DirectDraw or Direct3D
video output.
Changing display settings
1. Right-click on the desktop and select Display settings.
2. Select the display that you want to configure.
3. Change display settings as you want.
You can change the settings for both the computer display and the external display. For example, you can
define which one is the main display and which one is the secondary display. You also can change the
resolution and orientation.
Note: If you set a higher resolution for the computer display than the external display, only part of the screen
can be shown on the external display.

Using Lenovo Pen Pro

Depending on the model, your computer might come with a Lenovo Pen Pro (referred to as the pen in this
section). The pen enables you to write and draw in a natural manner. This section introduces the basic use of
the pen. For more information, refer to the documentation of the pen.
Notes:
• The color of the pen might vary by country or region of delivery. Depending on the model, the pen might
look slightly different from the illustrations in this topic.
• The pen is not waterproof. Keep the pen away from water and excessive moisture.
• The pen contains pressure sensors. Apply an appropriate amount of pressure as you would when writing
on the paper. Do not subject the pen to shock or vibration.
• The pen does not work when the multi-touch function is disabled in ThinkPad Setup.
Pen overview
1 Top pen button: Hold the top pen button for at least three seconds to enable Bluetooth pairing on the
pen.
30
P1/X1 Extreme User Guide
®
in full-screen mode, only the main display shows the