Sony SU-FL62 Instructions Manual page 21

2
Secure the TV and the Floor
Stand, and attach the cable
holder.
1 Referring to the hook and screw locations diagram/
table on page 12, determine the screw holes and
secure the two supplied lock screws (L) to the
holes.
For the following models, use the two supplied lock
screws (S):
KDL-52X2000, KDL-46X2000, KDL-40X2000
2 Attach the cable holder to the rear of the Center
Pillar with the two supplied screws (+PSW4 × 12).
Lock screw
Cable Holder
Screw (+PSW4 × 12)
Notes
• If the two lock screws are not used to secure the TV, it may
fall and cause injury.
• When using an electric screwdriver, set the torque setting
to approximately 1.5 N·m {15 kgf·cm}.
Step 5:
Attaching the Glass
Shelves
1
Attach the eight Glass Shelf
Supports to the Frame.
Glass Shelf Support
Note
Insert the Glass Shelf Supports into the holes of the Frame,
checking that they are parallel and level.
(Continued)
9
(GB)