Sony 3-291-730-21(1) Operating Instructions Manual page 33

Enjoying multiplex broadcast
sound (DUAL MONO)
You can enjoy multiplex broadcast sound when
the stand receives an AC-3 multiplex broadcast
signal.
Note
• To receive AC-3 signal, you need to connect a digital
satellite tuner to the stand with an optical cable or
coaxial cable, and set the digital output mode of the
digital satellite tuner to AC-3.
INPUT SELECTOR
CENTER SUBWOOFER
LEVEL
DISPLAY AMP MENU
RETURN
-
PRESET NIGHT DIMMER
-
TUNING TUNING
MUTING
VOLUME SOUND FIELD
1
Press AMP MENU.
2
X/x
Press repeatedly until
MONO"
appears, then press
3
X/x
Press to select the sound you want.
• MAIN: Plays back only the main
channel.
• SUB: Plays back only the sub
channel.
• MAIN+SUB: Main sound is output from
the left speaker and sub
sound is output from the
right speaker.
4
Press AMP MENU.
The AMP menu turns off.
AMP
MENU
C, X, x, c,
MENU
+
PRESET
+
"DUAL
or c.
Adjusting the delay between
the sound and the image (A/V
SYNC)
You can delay the sound using this function
when the image is slower than the sound.
INPUT SELECTOR
CENTER SUBWOOFER
LEVEL
DISPLAY AMP MENU
RETURN MENU
-
PRESET NIGHT DIMMER PRESET
-
TUNING TUNING
MUTING
VOLUME SOUND FIELD
1
Press AMP MENU.
2
Press X/x repeatedly until "A/V SYNC"
appears, then press
3
Press X/x to select the setting.
• OFF: Does not adjust.
• ON: Adjusts the difference between
picture and sound.
4
Press AMP MENU.
The AMP menu turns off.
Notes
• You may not be able to adjust the delay between
sound and image perfectly using this function.
• This function is useful only for Dolby Digital, DTS
and Linear PCM (2ch) input by coaxial (audio),
optical (audio) or HDMI.
AMP
MENU
C, X, x, c,
+
+
or c.
continued
33
GB