Bravia" Sync Features; What Is "Bravia" Sync; Preparing For The "Bravia" Sync - Sony 3-291-730-21(1) Operating Instructions Manual

"BRAVIA" Sync Features

What is "BRAVIA" Sync?

By connecting Sony components that are
compatible with the "BRAVIA" Sync with an
HDMI cable (not supplied), operation is
simplified as below:
• One-Touch Play: When you play back a
component such as a Blu-ray Disc/DVD player
(recorder), the stand and the TV are turned on
automatically and switch to the appropriate
HDMI input.
• System Audio Control: While watching TV,
you can select to output the sound from the TV
speaker or the speakers of the stand.
• System Power Off: When you turn off the TV,
the stand and the connected components are
also turned off simultaneously.
"BRAVIA" Sync is compatible with a Sony TV,
Blu-ray Disc/DVD player, AV amplifier, etc.,
with the Control for HDMI function.
CONTROL FOR HDMI is a mutual control
function standard used by CEC (Consumer
Electronics Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will
not operate in the following
cases:
• When you connect this stand to a component
which is not correspond with Control for
HDMI function.
• When you connect the stand and components
using other than HDMI connection.
We recommend that you connect this stand to
products featuring "BRAVIA" Sync.
Note
• Depending on the connected component, the Control
for HDMI function may not work. See the operating
instructions of the component.
Preparing for the
"BRAVIA" Sync
To use the "BRAVIA" Sync, set the Control for
HDMI function to on for the stand and the
connected component.
When you connect a Sony TV with the Control
for HDMI function, the Control for HDMI
function for the stand and the connected
component can be set simultaneously by setting
Control for HDMI function of the TV.
INPUT SELECTOR
CENTER
DISPLAY
C, X, x, c,
RETURN
-
PRESET NIGHT
-
TUNING
MUTING
VOLUME
1
Make sure that the stand is connected
to the TV and the connected
components (which should be
compatible with the Control for HDMI
function) using HDMI cables (not
supplied).
2
Turn on the stand, the TV and the
connected components.
3
Select the input of the stand connected
to the component you want to watch
(BD, DVD, SAT), and switch the HDMI
input of the TV, so that an image from
the connected component is displayed.
?/1
SUBWOOFER
LEVEL
AMP MENU
AMP
MENU
MENU
+
DIMMER PRESET
+
TUNING
SOUND FIELD
continued
27
GB