Step 2-Connecting The Aerial; Connecting An Indoor Aerial (Kv-14V5D, Kv-14V6D Only); Connecting An Outdoor Aerial - Sony Black Trinitron KV-14V5D Operating Instructions Manual

Step 2 — Connecting the Aerial
Connecting an indoor aerial (KV-
14V5D, KV-14V6D only)
If your local VHF/UHF signal is strong, an indoor aerial can be used to
obtain a clear picture. Connect the supplied aerial as follows:
1 Insert the aerial until it clicks.
2 After turning on the video TV, adjust the aerial for the best reception.
Be sure to adjust the aerial for the channel you want to record as well. If
reception is poor, connect an outdoor aerial to your video TV.

Connecting an outdoor aerial

For better TV reception and clearer recording, connect an outdoor aerial to
your video TV.
To connect a VHF aerial or a combination
VHF/UHF aerial—75-ohm coaxial cable (round)
Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the
video TV.
Rear
To connect both VHF and UHF aerials
Attach the aerial cable ends to the VHF/UHF mixer (not supplied).
Plug the mixer into the
TV.
Rear
300-ohm twin-lead cable
VHF/UHF mixer
After connecting the aerial, connect the mains lead to a wall outlet.
2
1
(aerial) socket, located at the rear of the
VHF/UHF aerial
or
(aerial) socket, located at the rear of the video
UHF aerial
75-ohm coaxial cable
On a wall
VHF aerial
5
Getting Started
GB