Step 2-Connecting The Aerial; Connecting An Indoor Aerial (Kv-V1430K/P Only); Connecting An Outdoor Aerial - Sony Trinitron KV-V1430K Operating Instructions Manual

Step 2 — Connecting the Aerial
Connecting an Indoor Aerial (KV-
V1430K/P only)
If your local VHF/UHF signal is strong, an indoor aerial can be used to
obtain a clear picture. Connect the supplied dipole aerial as follows.
1 Insert the aerial until it clicks.
2 After turning on the video TV, adjust the aerial for best reception.
GB
2
1

Connecting an Outdoor Aerial

For better TV reception and recording with clear video picture, connect an
outdoor aerial to your video TV.
To connect a VHF aerial or a combination
VHF/UHF aerial—75-ohm coaxial cable (round)
Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the (aerial) socket of the video TV.
VHF/UHF aerial
On a wall
Rear
or
To connect both VHF and UHF aerials
Attach the aerial cable ends to the VHF/UHF mixer (not supplied).
Plug the mixer into the (aerial) socket of the video TV.
UHF aerial VHF aerial
Rear
300-ohm twin-lead cable
VHF/UHF mixer
75-ohm coaxial cable
After connecting the aerial, connect the mains lead to a wall outlet.
5
Getting Started