Actron OBD II PocketScan Code Reader CP9125 User Manual page 11

5.Press and Hold
3 Seconds and Release.
6.Observe "ERASE? ERASE?" Displays.
ERASE? ERASE? ERASE?
7.Press and Hold
for 3 Seconds and Release.
8.Observe a Moving
NOTE: If a "NO LINK" message
displays, cycle ignition key to
the OFF position for 10
seconds, then back ON, and
repeat "Erasing Diagnostic Data."
9.Observe "DONE DONE" Displays.
DONE DONE DONE
NOTE: If the problem causing Diagnostic Trouble Code(s) still
exists, the code will return. The Diagnostic Trouble
Code may return immediately or may return after vehicle
has been driven.
NOTE: Pressing
Diagnostic Trouble Codes and Data and Holding
ERASE key will erase results again. ERASE ERASE ERASE ERASE
ERASE ERASE Key for ERASE
ERASE ERASE
ERASE ERASE
ERASE ERASE ERASE Key
-
on Display.
NO LINK
DONE
READ READ /Scr /Scr oll Do oll Do wn wn
READ /Scr READ READ /Scr /Scroll Do oll Down oll Do wn key will read wn
11
ERASE?
-