Inspection / Maintenance Monitors; Monitors Viewed; Monitor Status; Monitors May Be Cleared By - Actron OBD II PocketScan Code Reader CP9125 User Manual

Inspection / Maintenance Monitors (I/M Monitors):
The I/M Monitors (Inspection / Maintenance) function displays
a SNAPSHOT of the operations for the Emission System.
After a specific amount of drive time (each monitor has
specific driving conditions and time required), the
computer's "monitors" will decide if the vehicles emission
system is working correctly.
Some states MAY NOT require all monitors listed to be
"Ready" to pass the emissions test. Check with state
testing site for exact requirements. All states will fail a
vehicle that has the "MIL Light" lit at time of test.
•

Monitors Viewed:

Monitors
Misfire
Fuel
Comp
Catlyst
Htd Cat
Evap
Sec Air
A/C
O2 Snsr
O2 Htr
EGR

• Monitor Status:

Status Description
Vehicle was driven enough under proper conditions to
Ready
complete the monitor.
(Incomplete) - Vehicle was not driven enough under
Inc
proper conditions to complete the monitor.
•

Monitors may be cleared by:

Using the erase codes function.
Disconnected or discharged battery (on some vehicles.)
Computer module losing power (on some vehicles.)
Expanded Name
Misfire Monitor
Fuel System Monitor
Comprehensive Components Monitor
Catalyst Monitor
Heated Catalyst Monitor
Evaporative System Monitor
Secondary Air System Monitor
Air Conditioning Refrigerant Monitor
Oxygen Sensor Monitor
Oxygen Sensor Heater Monitor
Exhaust Gas Recirculation
6