Back Panel - Sony HD100 Operating Instructions Manual

Back Panel

1 2 3
VHF/UHF IN
VHF/UHF IN (DTV)
SATELLITE IN
VHF(SAT)/UHF
OUT
qd
1 VHF/UHF IN jack
Inputs analog non-satellite signals from your TV
antenna or cable TV connection. Some antennas
require an adapter (not supplied).
2 SATELLITE IN jack
Inputs satellite signals from your Satellite Dish
Antenna using RG-6 coaxial cable.
3 VHF/UHF IN (DTV) jack
Inputs digital non-satellite signals from your TV
antenna. Some antennas require an adapter (not
supplied).
4 RF REMOTE jack
Inputs remote control signals using the RF
Antenna.
5 ACCESS CARD slot
After you have inserted the Access Card, do not
remove the Access Card unless instructed to do so
by your service provider.
6 AUDIO/VIDEO OUTPUT jacks
Output audio and video signals to your TV,
digital monitor, or other audio/video equipment
using A/V, S-Video and/or Y/P
7 AC IN jack
Inputs AC power from a power outlet using the
AC Power Cord.
4
ACCESS CARD
RF
REMOTE
VCR
LOW SPEED
VGA OUT
CONTROL
DATA
qs qa 0
/P cables.
B R
5 6
VIDEO
1 2 3
Y
S VIDEO
DIGITAL
AUDIO L P
B
OUT
(OPTICAL)
(MONO)
R P
R
AUDIO
TEL LINE
AUDIO/VIDEO OUT
9
8 TEL LINE jack
Connects the Digital Satellite Receiver to a
telephone outlet using a telephone line cable.
9 DIGITAL AUDIO OUT (OPTICAL) jack
Outputs digital audio signals to the digital optical
input of your audio receiver.
q; VGA OUT jack
Outputs digital video signals to your TV or digital
monitor using a VGA cable.
qa LOW SPEED DATA jack
Can be used to connect your Digital Satellite
Receiver to certain products such as Personal
Video Recorders.
qs VCR CONTROL jack
Allows the VCR Controller to control a VCR. Also
allows connection of a monaural cable for use
with Sony SmartFile VCRs.
qd VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UHF input on your TV or VCR using coaxial (RF)
cable. The TV/SAT button on your remote control
can change the output from the VHF/UHF IN
jack to the VHF/UHF IN, SATELLITE IN and
VHF/UHF(DTV) jacks.
CAUTION
U L
®
AC IN~
8 7
85