3: Connecting A Cable Box/Satellite Receiver/Vcr - Sony TAV-L1 Operating Instructions Manual

3: Connecting a cable box/satellite receiver/VCR

Cable box or
satellite receiver
S VIDEO
VIDEO (yellow)
Audio/video cord
(not supplied)
AUDIO-L (white)
AUDIO-R (red)
1
Remove the covers.
When all connections have been made, replace the
covers.
2
Connect your satellite receiver, VCR and
cable.
To connect a satellite receiver
1 Connect the satellite antenna cord (not
supplied) to the satellite receiver's satellite
input jack.
2 Use an audio cord (not supplied) and S video
cord (not supplied) to connect the satellite
receiver's AUDIO and S VIDEO output jacks
to the system's AUDIO and S VIDEO input
jacks (VIDEO (IN) 1 or 3).
To connect a VCR and cable
1 Connect the CATV cord (not supplied) to the
VCR's VHF/UHF input jack.
2 Use an audio cord (not supplied) and video
cord (not supplied) to connect the VCR's
AUDIO and VIDEO output jacks to the
system's AUDIO and VIDEO input jacks
(VIDEO (IN) 1 or 3).
3
Connect the supplied AC power cord
(mains lead) to the AC IN socket on the
rear of the system.
Rear of the system
Satellite antenna
cord (not supplied)
S VIDEO cord
(not supplied)
S VIDEO
VIDEO
(MONO)
L
AUDIO
R
1 3
VIDEO IN
AC power cord
(mains lead)
(supplied)
VCR
S VIDEO cord (not supplied)
S VIDEO
VIDEO (yellow)
Audio/video cord
(not supplied)
AUDIO-L (white)
AUDIO-R (red)
Notes
• Do not connect the AC power cord (mains lead) to
your mains socket until all connections are complete.
• If available, use an S video cord to connect your
equipment.
• If you connect other equipment, see page 71.
CATV cord (not
supplied)
Continued
19
US