(Resume Play); Searching For A Particular Point Or A Scene On A Disc; (Scan, Slow-Motion Play, Freeze Frame) - Sony TAV-L1 Operating Instructions Manual

Notes
• You cannot use Program Play, Shuffle Play, or Repeat
Play with Video CDs with PBC playback.
• Depending on the VIDEO CD, [Press ENTER] in step 3
may appear as [Press SELECT] in the instructions
supplied with the disc. In this case, press H.
Tip
To play without using PBC, press ./> or the number
buttons while the system is stopped to select a track, then
press H or (ENTER).
You cannot play still pictures such as a menu. To return to
PBC playback, press x twice, then press H.
Resuming playback from the point where
you stopped the disc

(Resume Play)

(DVD VIDEO, DVD-VR, VIDEO CD, Super
Audio CD, CD, DATA CD, DATA DVD only)
When you stop the disc, the system remembers the
point where you pressed x and you can start playback
from the point you stopped the disc.
1
While playing a disc, press x to stop
playback.
"Resume" appears in the front panel display.
If "Resume" does not appear, Resume Play is not
available.
2
Press H.
The system starts playback from the point where
you stopped the disc in step 1.
To enjoy a disc that is played before by resume
playback (Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
This system stores the point where you stopped the
disc for up to 40 discs and resumes playback the next
time you insert the same disc. If you store a resume
playback point for the 41st disc, the resume playback
point for the first disc is deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see "[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)" (page 65).
Notes
• If [MULTI-DISC RESUME] in [CUSTOM SETUP] is set
to [OFF] (page 65), the resume point is cleared when you
change the input.
• The point where you stopped playing may be cleared
when:
– you change the play mode.
– you change or reset the settings on the Setup Display.
– you change the input.
– you disconnect the AC power cord (mains lead) for a
long period of time.
34
US
• For DVD-Rs/DVD-RWs in VR mode, CDs, Super Audio
CDs, DATA CDs, and DATA DVDs the system
remembers the resume playback point for the current disc.
The resume point is cleared when:
– you eject the disc.
– the system enters standby mode.
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not correctly work with some discs.
• Depending on where you stop the disc, the system may not
resume playback from exactly the same point.
• If you play a disc for which Parental Control is set, this
function does not work.
Tip
To play from the beginning of the disc, press x twice, then
press H.
Searching for a particular point or a
scene on a disc
Searching for a particular point on a disc

(Scan, Slow-motion Play, Freeze Frame)

(DVD VIDEO, DVD-VR, VIDEO CD, Super
Audio CD, CD, DATA CD, DATA DVD only)
Note
Depending on the DVD/VIDEO CD, you may not be able to
do some of the operations described.
Locating a point quickly by playing a disc in fast
forward or fast reverse (Scan)
(except for JPEG)
Press m or M
you find the point you want, press H to return to
normal speed. Each time you press
during scan, the playback speed changes. With each
press the indication changes as shown below. Actual
speeds may differ with some discs.
Playback direction
×2B t 1M t 2M t 3M
3M (DVD VIDEO/DVD-R/DVD-RW/VIDEO
CD only)
×2B (DVD VIDEO/Super Audio CD/CD only)
Opposite direction
×2b t 1m t 2m t 3m
3m (DVD VIDEO/DVD-R/DVD-RW/
VIDEO CD only)
×2b (DVD VIDEO only)
With each press, playback speed becomes faster.
while playing a disc. When
m or M