Care And Cleaning - Electrolux ESF6767KXA User Manual

CARE AND CLEANING

CAUTION!
Cleaning the machine in regular intervals prolongs
the machine's service life.
Whenever you will not be operating your machine
• Fill the detergent compartment without loading any
dishes into the machine, select a program that runs
at high temperature, and start the machine. If this
is ineffective, use a specialty dishwasher cleaner
available from most supermarkets.
Cleaning the seals in the machine door
• To clean any accumulated residues in the door
seals, wipe the seals regularly by using a
dampened cloth.
Cleaning the machine
• Clean the filters and spray arms at least once
a week.
• Unplug your machine and turn off its tap before
starting the cleaning.
• Do not use hard materials when cleaning your
machine. Wipe with a fine cleaning material and a
dampened cloth.
Filters
• Check if any food wastes have remained on the
coarse and fine filters.
• If any food wastes are left, remove the filters and
clean them thoroughly under the water tap.
• Micro Filter
• Coarse Filter
• Metal/Plastic Filter
1. To remove and clean the filter combination,
turn it counter clockwise and take it out by lifting
upwards.
1
2. Pull and remove the metal/plastic filter.
3. Then pull the coarse filter out of the micro filter.
4. Rinse it with lots of water under the tap. Refit the
metal/plastic filter. Insert the coarse filter into the
micro filter in a way that the marks will correspond
to one another. Attach micro filter into the metal/
plastic filter and turn to the direction of arrow and it
is locked when the arrow on micro filter can be seen
from across.
4
• Never use your dishwasher without any filter.
• Incorrect fitting of the filter will reduce the washing
effectiveness.
• Clean filters are very important in terms of the proper
running of the machine.
.
b
a
Spray arms
Check whether or not the holes for the upper and lower spray
arms are clogged. If there is any clogging, remove the spray
arms and clean them under water.
You can remove the lower spray arm by pulling it upwards,
while the upper spray arm nut can be removed by turning the
nut to the left.
Be sure that the nut is perfectly tightened when refitting the
upper spray arm.
3
2
1
c
3
2
21
4