General 240H Operator's Manual page 21

240H ONE MAN HOLE DIGGER
FORM GOM14081201, VERSION 1.1
FIGURE 3
3) Turn the engine ON/OFF ignition switch to the ON
position. The switch is located near the underside of
the engine fuel tank. FIGURE 4.
FIGURE 4
4) Depress the engine primer system bulb repeatedly
to feed fuel directly into the carburetor until it can be
seen in the clear plastic fuel return line. FIGURE 5.
FIGURE 5
5) If the engine is cold or the ambient temperature is
low, move the choke control lever to the left/closed
position (away from the fuel tank) to deploy the engine
choke mechanism. A warm (previously run) engine
may not require choking. FIGURE 6.
Proper operation of the choke lever moves it in a
sideways movement as viewed by the operator. Do
not attempt to move the choke lever in a fore and
aft direction. Such action can result in damage to
the choke control mechanism.
FIGURE 6
6) It is not necessary to open the engine carburetor
with the throttle control to start the engine. Grip the
throttle control with the right hand. This procedure is to
be followed regardless of the ambient temperature.
19