Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for General P18HPART
Summary of Contents for General P18HPART
- Page 1 VGA RESOLUTION WIRELESS ARTICULATING PROBE USER’S MANUAL P18HPART Please read this manual carefully and thoroughly before using this product. 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction ........3 Key Features . -
Page 3: Introduction
VGA Resolution Wireless Articulating Probe. Please read this manual carefully and thoroughly before using the probe. The P18HPART is the 1-meter long version of a high-performance, wireless, camera-tipped articulating probe that captures video and still images at VGA (640 x 480 pixel) resolution. Inside its controller is a transmitter that makes the probe compatible with the DCS1800 Wireless Recording Video Borescope console. -
Page 4: What's In The Case
70° mirrored viewing tip and this user’s manual. PRODUCT OVERVIEW Fig. 1 shows the controls and key structures of the P18HPART. Familiarize yourself with their names and functions before moving on to the Setup Instructions and Operating Instructions. -
Page 5: Setup Instructions
SETUP INSTRUCTIONS CHARGE PROBE BATTERY You can use the P18HPART “right out of the box” before fully charging its battery by docking the probe with the DCS1800 console and charging the batteries of both components at the same time. The Setup Instructions section of your DCS1800 or DCS1800ART user’s manual shows how to dock the probe... -
Page 6: Operating Instructions
(see figure above). To adjust the intensity of the LEDs at the tip of the P18HPART, roll the thumbwheel on the side of the probe controller forward or back. - Page 7 WITH ANTI-REFLECTION You can also use the anti-reflection function to remove glare created by the P18HPART’s mirrored viewing tip (see the next section of this manual for installation and alignment instructions). The pair of images below illustrates the net positive effect.
-
Page 8: Attaching The Mirrored Viewing Tip (Optional)
ATTACHING THE MIRRORED VIEWING TIP (OPTIONAL) The only accessory included with the P18HPART is a 70° mirrored viewing tip. To attach it to the probe: 1. Pull off the red rubber lens cap (Fig. 1, Callout 6). 2. Unscrew and remove the black metal thread protector ring (Callout 5), as shown at right. -
Page 9: Specifications
SPECIFICATIONS Probe Type Soft metal, with flexible-obedient remote- controlled neck Probe Length 1m (3.3 ft.) Camera Head Diameter, Type 0.23 in. (6mm), Stainless steel Camera Head Diameter 0.26 in. (6.5mm) with Thread Protector Camera Head Length 0.9 in. (23mm) Camera Resolution VGA (640 x 480 pixels) Camera Depth of Field 0.25 to 12 in. - Page 10 Do not use any corrosive liquid—such as alcohol—to clean the probe body or camera head. Use a cotton swab and a mild fluid detergent to clean the body and head. P18HPART’s Tolerance of Various Liquids Liquid Tolerant Liquid...
-
Page 11: Warranty Information
The warranty period begins on the date of purchase. You are encouraged to register your product online. General will extend your warranty an additional 60 days if you register at www.generaltools.com/ProductRegistry. - Page 12 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com Specifications subject to change without notice ©2014 GENERAL TOOLS & INSTRUMENTS NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS. MAN# P18HPART 4/16/14...
Need help?
Do you have a question about the P18HPART and is the answer not in the manual?
Questions and answers